More About
NASIOL ZR53 NANO CERAMIC COATING
Nasiol ZR53 is an ultimate nano ceramic protection system against all envi- ronmental effects. Its unique technology enables it to achieve a thick coating and this coating prevents your car against bird droppings, acid rains, UV lights.
ZR53 coated surfaces enables you to clean your car easily with less time and energy. Your car will be stay more clean and shiny and protected with Nasiol ZR53.
It also enables you to clean your car easily using less time and energy. Your car will stay cleaner and shinier with Nasiol ZR53. Unlike other ceramic coatings, ZR53 only gets crystallized at a nano level when applied, making a permanent bond with the car paint.
It doesn't harden completely but has a complex two-layer coating system, a soft layer at the bottom and a hard layer at the top, ensuring maximum resistance and elasticity superior to other ceramic coatings. It lasts up to 3 years.
Product is available only in 50ml Kit
ADVANTAGES:
1: Extends lifetime
2: Saves money
3: Keeps appearance
4: Less swirls
5: Satin texture
6: Scratch resistance
7: UV protection
8: Chemical resistance
9: High Gloss
APPLICATION SURFACES:
NASIOL ZR53 is applicable to paint work of cars and transport vehicles, headlights, taillights, rims, black plastic and trim surfaces. Do not apply this product to unlacquered plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textile, tires, and absorbent parts.
APPLICATION:
1: Ensure that temperature and relative humidity (RH) values (+5˚C ~ + 30˚C / 41 ˚F ~ 86 ˚F / 50% RH) of application space are as close as possible to suggested conditions to achieve maximum product performance
2: Avoid direct sunlight during the application and only work on cool surfaces. Wash your vehicle thoroughly
3: If required, apply clay bar. After decontamination, apply polishing / compounding via using appropriate tools and silicone / waxfree cutting compounds with respect to the physical condition of your vehicle’s surface
4: When polishing is complete, wash the car and ensure that all the application areas are totally dry before using the product..
5: Shake the product gently before use. Open the lid and pour the necessary amount of product onto the suede cloth. 2-3mL is enough for 1m² area
6: Prepare the surface by using Nasiol Clean to remove any residual contamination and dry with a lint-free microfiber cloth prior to the use of the product
7: Before using the product, wear the protective nitrile gloves included in the box. Place the suede cloth onto applicator block’s sponge surface proportionally
8: Shake product gently before use
9: Do not work on areas largerthan 1 m²/10 ft² at once
10: Open the lid and pour essential amount of product onto the suede cloth. 5-8 mL is enough for 1 m²/10 ft² area
11: Do not forget to close the lid during the application
12: Dispose or replace suede after use on 3-4 panel sections
13: Spread the product gently over the surface with a criss-cross motion.
14: Once beading occurs (it takes 30 seconds in normal conditions) wipe the excessive amount of the product off the surface gently using the Nasiol Microfiber Cloth in linear motions
15: After wiping the surface, complete final buffing gently with using Nasiol Microfiber Cloth in circular motions for each section
16: Keep the coated surface away from direct sunlight, dust, water and contamination during 24 hours curing period.
BOX INCLUDES:
1: Nasiol ZR53 Bottle
2: Microfiber Cloths x 2
3: Suede Applicators x 10
4: Applicator Block
5: Nasiol Sticker
6: Protective Gloves x 2
7: Multilanguage Application Manual