More About
NASIOL TRIM COAT NANO CERAMIC COATING
Nasiol TrimCoat car plastic protection keeps trim and plastics color-saturated with its high scratch resistance and ultra water-repellency features. It prevents color fading caused by UV radiation, strong chemicals, and road grime. Besides, it permanently restores dull and discolored parts to their original satin look.
Nasiol TrimCoat is applicable to exterior/interior plastic, vinyl, and rubber trim such as bumpers, lights, moldings, door handles, grilles, fenders, side-view mirror housings, and windshield cowlings
Product is available only in 30ml Kit
ADVANTAGES:
1: Satin finish, semi-gloss appearance
2: Water and oil repellent
3: Protection against color fading
4: Color restoration original appearance
5: UV protection
APPLICATION SURFACES:
The exterior/interior plastic, vinyl and rubber trim is suitable for use on bumpers, headlights, door handles, grilles, fenders, side mirror guards and windshield covers.
APPLICATION:
1: For best results, ensure that the environment where the application will take place is as close as possible to the recommended levels of temperature and humidity (23°C and 50% relative humidity)
2: Apply in a shaded area
3: Only apply to surfaces that are not too cold or warm
4: Wash your vehicle thoroughly and gently
5: Dry the vehicle thoroughly to prevent water drops on the surface during application.
6: Eliminate any dust and dirt on the surface before application using Nasiol Clean. Ensure that the surface has thoroughly dried.
7: Partition the application area visually or with masking tape. Do not work on a partition larger than 1m² at a time.
8: Overlapping edges of partitions do not cause issues during application.
9: Shake the product gently before use. Carefully remove the cap.
10: Place the small suede cloth on the block applicator, and apply the necessary amount of product (depending on the size of the application area) onto the cloth
11: Recap the bottle in order to prevent air contact. Using the suede cloth, spread the product throughout the surface in horizontal and vertical movements
12: Do not wipe any excess product off the surface within 30 – 60 seconds and beyond
13: Following the application of the first layer, wait for 60 minutes, then repeat the steps for the second layer.
14: Throughout the curing time, keep the coated surface away from direct sunlight, excessive dust, water, and other contaminants. For the first 48 hours, do not wash the surface with shampoo or detergents.
15: The vehicle can be taken outdoors 24 hours after the application.
BOX INCLUDES:
1: Nasiol Trim Coat Bottle
2: Applicator Cloth
3: Nitrile Gloves
4: Nasiol Sticker
5: Dropper