More About
NASIOL METALCOAT F2 NANO CERAMIC SPRAY COATING
The fastest method of coating a vehicle with a ceramic scratch resistance compound is only possible with Nasiol MetalCoat F2 spray-on application.
Nasiol MetalCoat F2 can safely treat the surfaces of automobiles, bicycles, motorcycles, and trucks with its unique nano-coating formula by forming a single layer scratch resistance level.
Product is available only in 50ml
ADVANTAGES:
1: Spray it and buff it! A simple worry-free application and cleaning
2: Instant gloss with an exceptional degree of water repellency
3: Perfect for detailing enthusiasts
4: Safe for exterior plastic trims
5: High scale resistance against destructive chemicals
6: Surface protection between 6 to 12 months
APPLICATION SURFACES:
Nasiol MetalCoat F2 is applicable to car body, engine plastic and metal parts, headlights, taillights, and rims. Do not apply to unlacquered plastic parts, fresh paint jobs (up to 3 months), low-quality paint jobs, glass, textile, and tires
APPLICATION:
1: Ensure that temperature and relative humidity (RH) values (+5 ̊C ~ + 30 ̊C / 41 ̊F ~ 86 ̊F / 50% RH) of application space are as close as possible to suggested conditions to obtain maximum product performance.
2: Avoid direct sunlight during the application and only work on cool surfaces
3: Wash your vehicle thoroughly. If required, apply clay bar
4: After decontamination, apply polishing / compounding via using appropriate tools and silicone free / wax-free cutting compounds with respect to the physical condition of your vehicle’s surface.
5: When polishing is complete, wash the car and ensure that all the application areas are totally dry before using the product.
6: Prepare the surface by using Nasiol Clean to remove any residual contamination and dry with a lint-free microfiber cloth prior to the use of the product.
7: Before using the product, wear the protective nitrile gloves included in the box.
8: Consumption is 5-8mL/m² (5-8mL /10ft²). Spray on one square meter around 20-30 times with a standard MetalCoat F2 bottle and buff immediately with Nasiol Microfiber Cloth.
9: Do not work on areas larger than 1m²/10ft² at once.
10: Keep the coated surface away from direct sunlight, dust, water and contamination during 24 hours curing period.
BOX CONTENTS:
1: Nasiol MetalCoat F2
2: Microfiber Cloth
3: Mini Trigger
4: Nitrile Gloves
5: Nasiol Sticker